AFM 37/8
Maximum operating pressures at various temperatures and with various media (guiding values)
Edition: 08/2015, supersedes all prior editions.
Please see the latest issue at www.reinz-industrial.com
Max. operating pressure (bar) 1)  with medium
Temperature
(°C)
Thickness
(mm)
Water, steam, aqueous solutionsGasesOils, greasesFuels, solvents
-100 2)
1
-
-
25
-
 
2
-
-
16
-
 
3
-
-
10
-
 
-50
1
25
25
40
16
 
2
16
16
25
10
 
3
10
10
16
6
 
0
1
60
40
60
40
 
2
40
25
50
25
 
3
25
16
25
16
 
50
1
60
40
60
40
 
2
40
25
50
25
 
3
25
16
25
16
 
100
1
25
25
40
25
 
2
16
16
25
16
 
3
10
10
16
6
 
150
1
16
16
25
10
 
2
6
10
16
6
 
3
2
2
6
2
 
200
1
-
-
10
-
 
2
-
-
6
-
 
3
-
-
2
-
 
The data quoted above are valid for the material "as delivered" without any additional treatment and with sufficient surface pressure, e.g. according to DIN 28 090ff. In view of the countless possible gasket designs as well as installation and operating conditions, definitive conclusions cannot be drawn for all applications regarding the behaviour in a sealed joint. Therefore, we do not give any warranty for technical data, as they do not represent assured characteristics. If you have any doubt, please contact us and specify the exact operating conditions.
1)
It is possible that far higher pressures are permitted for flanges with projections and recesses or grooves & tongues. Please consult us in individual cases, specifying the exact sealing conditions.
2)
Use at temperatures below -50 °C is possible, if surface pressure is not less than approx. 15 N/mm² in liquids or 30 N/mm² in gases (internal pressure must be taken into account). In addition, the gasket must not be subjected to bending or flexing stresses. At temperatures below -100 °C, operating pressures may not be higher than the max. values given for -100 °C.
AFM 37/8
  Water, steam, aqueous solutions
  Temperature (°C)
 
Thickness 1 mm2 mm3 mm
 
  Gases
  Temperature (°C)
 
Thickness 1 mm2 mm3 mm
  Oils, greases
  Temperature (°C)
 
Thickness 1 mm2 mm3 mm
 
  Fuels, solvents
  Temperature (°C)
 
Thickness 1 mm2 mm3 mm
   
© VICTOR REINZ 2019