|
|
|
RGC 210, RGC 257, RGC 275 |
|
Technical Data Sheet 410 (previously TDS 321)
Edition: 04/2023, supersedes all prior editions.
Please see the
latest issue at www.reinz-industrial.com |
|
Material
|
These materials consist of cork bonded with nitrile rubber.
|
Properties
|
The structure of these materials, which are resistant to oils and fuels, ensures
high compressibility and recovery.
|
Application
|
RGC 210
Sight glass gaskets, for sealing glass to metal or ceramic to metal, cover gaskets
for lightweight containers where good resistance to oils, fuels and solvents is
required.
RGC 257
Sight glass gaskets, gaskets in glass/metal combinations, cover gaskets for
lightweight containers where good resistance to oils and aromatic solvents is
required.
RGC 275
For sealing oil-filled transformers, hatch covers of tanks and fuel bunkers in
the shipbuilding industry, etc.
|
Technical Data
RGC 210
|
Density |
g/cm³ |
0.6 - 0.75 |
|
|
|
Compressibility and recovery
acc. to ASTM F 36, procedure B |
compressibility |
% |
25 - 40 |
recovery |
% |
> 80 |
|
|
|
Surface pressure |
when installed |
N/mm² |
7 |
|
|
|
Short-term peak temperature |
°C |
150 |
|
|
|
Maximum continuous temperature |
°C |
135 |
|
|
|
Maximum internal pressure |
bar |
40 |
|
|
Max. continuous temperature and max. pressure must not occur
simultaneously.
|
|
RGC 210 complies with the following specifications:
ASTM F 104 Identification No. F 226
100
ASTM No. P 2245 A
DIN 3535, part 5, Type A, version 25 (DIN-DVGW)
|
|
The data quoted above are valid for the material "as delivered" without
any additional treatment. In view of the countless possible
installation and operating conditions, definitive conclusions cannot be
drawn for all applications regarding the behaviour in a sealed joint.
Therefore, we do not give any warranty for technical data, as they do
not represent assured characteristics. If you have any doubt, please
contact us and specify the exact operating conditions.
|
Technical Data
RGC 257
|
Density |
g/cm³ |
0.5 - 0.7 |
|
|
|
Compressibility and recovery
acc. to ASTM F 36, procedure B |
compressibility |
% |
35 - 55
|
recovery |
% |
> 80 |
|
|
|
Surface pressure |
when installed |
N/mm² |
5 |
|
|
|
Short-term peak temperature |
°C |
135 |
|
|
|
Maximum continuous temperature |
°C |
120 |
|
|
|
Maximum internal pressure |
bar |
20 |
|
|
Max. continuous temperature and max. pressure must not occur
simultaneously.
|
|
RGC 257 complies with the following specifications:
ASTM F
104 Identification No. F 229 000
|
|
The data quoted above are valid for the material "as delivered" without
any additional treatment. In view of the countless possible
installation and operating conditions, definitive conclusions cannot be
drawn for all applications regarding the behaviour in a sealed joint.
Therefore, we do not give any warranty for technical data, as they do
not represent assured characteristics. If you have any doubt, please
contact us and specify the exact operating conditions.
|
Technical Data
RGC 275
|
Density |
g/cm³ |
0.7 - 0.85 |
|
|
|
Compressibility and recovery
acc. to ASTM F 36, procedure B |
compressibility |
% |
25 - 40 |
recovery |
% |
> 75
|
|
|
|
Surface pressure |
when installed |
N/mm² |
6 |
|
|
|
Short-term peak temperature |
°C |
150 |
|
|
|
Maximum continuous temperature |
°C |
135 |
|
|
|
Maximum internal pressure |
bar |
40 |
|
|
Max. continuous temperature and max. pressure must not occur
simultaneously.
|
|
RGC 275 complies with the following specifications:
ASTM F 104 Identification No. F 229 000
|
|
The data quoted above are valid for the material "as delivered" without
any additional treatment. In view of the countless possible
installation and operating conditions, definitive conclusions cannot be
drawn for all applications regarding the behaviour in a sealed joint.
Therefore, we do not give any warranty for technical data, as they do
not represent assured characteristics. If you have any doubt, please
contact us and specify the exact operating conditions.
|
Form of delivery
|
Gaskets |
according to a drawing, dimensions supplied, or other arrangement.
|
Blanks |
according to dimensions supplied |
|
Sheets |
914 x 914 mm |
|
Nominal thicknesses and tolerances (mm) |
|
RGC 210 |
0.80
|
±0.25
|
1.00
|
±0.25
|
1.20
|
±0.25
|
1.60
|
±0.38
|
2.00
|
±0.38
|
2.40
|
±0.38
|
3.00
|
±0.38
|
4.00
|
±0.38
|
|
RGC 257 |
1.00
|
±0.25
|
1.20
|
±0.25
|
1.60
|
±0.38
|
2.00
|
±0.38
|
2.40
|
±0.38
|
3.00
|
±0.38
|
4.00
|
±0.38
|
|
RGC 275 |
1.60
|
±0.38
|
2.00
|
±0.38
|
3.00
|
±0.38
|
4.00
|
±0.38
|
6.00
|
±0.38
|
|
Other thicknesses by agreement |
|
|
|
|
|
|